You are using IPv4 from 54.92.197.82
Consulintel: logos
 
SEARCH
Are you a...?
> ISP
Keep informed, visit our
Tell us your thoughts
on IPv6 > POLL
Looking for an
IPv6 Task Force? >
Questions? > FAQS
Jump to PROJECTS
Next EVENTS
000 members
043 guests
LOGIN 
Password 
Not member yet?
Get "extras". Register
Search Bar Plug-in
Firefox      IE7
Check your IPv6 connectivity
In order to check that the stack works, execute #ping6 ::1

If the result is the following (or similar):

PING ::1(::1) with 56 data bytes

64 bytes from ::1: icmp_seq=1 ttl=64 time=0.046 ms
64 bytes from ::1: icmp_seq=2 ttl=64 time=0.016 ms
64 bytes from ::1: icmp_seq=3 ttl=64 time=0.013 ms
64 bytes from ::1: icmp_seq=4 ttl=64 time=0.012 ms
64 bytes from ::1: icmp_seq=5 ttl=64 time=0.009 ms

It means that you already have installed, correctly, the IPv6 stack in your machine.

How to install the IPv6 stack

IPv6 is configured by default on NetBSD machines. In this configuration, a router in the network executing rtadvd is needed.

The configuration is enabled in /etc/defaults/rc.conf, where ip6mode="authost" is specified.

Back